免费播放很黄很色毛片,精品久久久久久中文字幕人妻最新

TranslationMobile

二能插裝閥
能插裝閥

"logic" in Chinese : n. 1.邏輯，理論學。 2.推理[方法]；邏輯性，條理 ...
"valve" in Chinese : n. 1.【機械工程】閥，活門，舌門；汽門。 2.【解剖 ...
"valves" in Chinese : 瓣閥門; 閥408; 閥門
"manifold valves and cartridge valves" in Chinese : 疊加閥和插裝閥
"-logic" in Chinese : -logic, -logical 〔構成與 -logy 結尾的名詞相應的形 ...
"and logic" in Chinese : “與”邏輯
"logic" in Chinese : n. 1.邏輯，理論學。 2.推理[方法]；邏輯性，條理性。 3. 威力，壓 ...
"logic-and" in Chinese : 邏輯“與”
"or logic" in Chinese : 或邏輯
"a irating valves" in Chinese : 吸（抽）氣閥
"adaptation of valves" in Chinese : 閥調配
"admission valves" in Chinese : 進氣閥。
"air valves" in Chinese : 空氣閥門
"anal valves" in Chinese : 肛瓣; 臀瓣
"ash valves" in Chinese : 排灰閥

Examples

So the working efficiency is low . ( 3 ) from the structure of the logic valve , as the poppet valve is sealed by a line touching , the service life should be tested
( 3 )從邏輯閥的結構來看，由于邏輯閥芯是靠線接觸來實現密封的，長期在快速?zèng)_壓的條件下，其使用壽命尚待考驗。
( 5 ) if the opening of the logic valve is limited , the fast transformation function of the logic valve will be improved , and the returning time of the piston will be reduced
（ 5 ）限制邏輯閥的開口量，可提高邏輯閥的快速換向性能，從而可縮短活塞的回程時間，提高系統的工作效率。
With large diameter logic valves and precise flow control valves , a short response time with low shock values and an accurate adjustment in three phases injection can be achieved
壓射系統配用大口徑邏輯閥及精密流量控制閥，提高了壓射反應和減低油壓震蕩，并且提供了精確的三階段壓射調校。
It makes with large diameter , logic valves and precise flow control valves , high specification piston accumulators . rigid triple tie rod connection between injection unit and locking mechanism enables maximum transmission of shot force
壓射系統采用大流量插裝閥及精密流量控制閥，提供了精確的一速二速及增壓三階段壓射系統，動作準確穩定。
From the research of the experiment and the simulation , conclusions and suggestions are gotten : ( 1 ) the fast hydraulic system which uses fast on - off valve as the pilot valves to control the logic valve is an available system
從仿真和實驗研究可得出如下結論和建議： ( 1 )本課題所研究的采用快速開關閥作先導閥控制邏輯閥的快速液壓系統，是比較可行的方案。
In order to overcome the disadvantages of servo valves and the spool valves , the fast hydraulic system controlled by the fast on - off valve is researched which uses the on - off valves as the pilot valves . they are used to control the opening and closing of the logic valves , thus they can control the pressure and the flow . so they can control the movement direction and the velocity of the piston
為了克服伺服閥和滑閥的不足，本文所研究的基于快速開關閥的快速液壓系統采用快速開關閥作先導閥，控制邏輯閥的開啟和關閉，從而控制液流的通斷和壓力的高低、流量的大小，以實現對活塞運動方向、速度的控制。